MANERA's latest surf movie BACÁN is out.Watch the movie
The MAGMA 5.4.3mm is the weapon of choice if you want to spend the whole winter in the water. It is the suit our cold water team is using in Iceland, Vancouver or Sweden.
The Magma is built for the cold and windy winter days.
The Magma+ is one of the best material out there: not only its fleece works as an effective insulator and heat generator, but it is manufactured to be extremely flexible to keep even the thickest suit very stretchy. In addition, it dries 30% faster than a classic fleece, you’ll never have to put on a wet wetsuit again.
It is the wetsuit of your choice if you don’t want to stay home during winter sessions.
Bring an end to frozen and frustrating sessions.
When the industry standard is to develop 2D patterns and try to fit it on a 3D body, we decided to break new ground and take the opposite direction. We use computer design to model good-fitted wetsuits in 3D, then we employ an innovative software that converts it into a precise 2D pattern for the factory.
It creates a natural, second-skin fit that makes the MANERA wetsuits stand out.
Warmth: No water entry, no air pocket.
Durability: The neoprene is only stretched when moving.
Comfort: No over tight areas, comfortable armpits/crotch.
Style: Folds will never be fashionable.
Some areas are very sensitive to friction, tensions and tearing. All MANERA wetsuits have been designed with a demanding brief including:
. Avoiding seams in tensions area, to maximize flexibility and strength.
. Making sure the seams are stretched vertically and not sideways.
. Removing seams from friction areas, which avoids rash and increases stretch capacity.
. Reinforcing strategic parts and panels right where it needs to be.
Sealing prints make the ankles and wrists stiffer. It has a joint role that keeps the water away and maintains the arms and legs panels in place.
The back of the knees is an area that requires specific care. The BACK KNEE EMBOSS helps the neoprene to bend more naturally for greater comfort during flexion of the knees.
A Wetsuit leg filled up with water is a very uncomfortable issue: The MANERA water strainer panel is here to prevent it. The leaky + perforated neoprene drains the water out of your leg instantly to let you continue the session in the best possible conditions.
MANERA wetsuits use a new process to bring more durability, waterproofness and flexibility.
The neoprene layers are glued together and then "blind-stitched" (the needle does not go through the neoprene layer completely). Then the SD² tape is welded to the seam by an air heater machine. This innovative process brings more durability, waterproofness and flexibility to our wetsuits.
The Triplex MAGMA is designed for warmth.
Re-flex skin / Protection
Air-foam / Insulation
Magma + / Warmth & fast drying
These three materials brought together create a warm, durable and comfortable wetsuit.
Warmth & fast drying
The new MAGMA+ is from a new generation of thermal materials. Its fleece insulates and keeps you warm even during the worst winter days.
MAGMA+ is found on all parts of MAGMA wetsuits, except the arms which require greater flexibility.
Thanks to its quick-drying fleece and its internal structure that acts as a water-draining tunnel, MAGMA+ provides the best drying time on the market.
The drying time between MAGMA+ and a conventional fleece is reduced by about 30%.
Thanks to its structure and low density, MAGMA+ is about 10% lighter than a classic fleece. As it dries quickly and absorbs very little water, MAGMA wetsuits are ultralight, even during use.
Being in direct contact with the skin, the inside jersey is a key part of the wetsuit. Our X10D fabric not only provides maximum stretch and lightness, but also a smooth, silky feeling on the skin. On MAGMA models, the X10D comes in recycled.
We have chosen to use a very light neoprene foam as we believe having less weight means improved comfort & endurance. It also features the best flex & insulation of the market, with the quilted touch you love in a Manera suit.
Air-foam is limestone based.
Born from the latest technologies of stretch fabrics, the RE-FLEX SKIN is extremely flexible, durable and UV proof. It enhances your movements and makes them more explosive.
The different neoprene layers are fused on the tips of arms and legs to make it thinner and more aesthetic. It protects the inside neoprene foam (AIR FOAM) by covering it.
If the Water strainer panel is still not enough for you: The MANERA ankle straps are designed to be very thin so water sprays can’t take them off. They are also stiff enough to block the water from coming in, and light for a better comfort.
Before being cut into several slices of a specific thickness, the neoprene is cooked and then shaped into a clean, rectangular slab.
We have a single, trustworthy supplier with whom we have been closely working since 2012.
SHEICO is a Taiwanese company that produces our goods in Cambodia, and they also produce most of the world’s premium wetsuits. Manufacturing around 45 million wetsuits a year, they can have a huge impact on the global wetsuit market’s CO² emissions.
SHEICO claims that a wetsuit with all the greener technologies listed below emits 24% less CO² than a standard wetsuit. If all SHEICO customers chose to implement all these just like we do, then the whole industry would save 12,1 million kg of CO² emission every year.
This model features a 83% recycled nylon outside jersey and a 100% recycled nylon inside jersey.
This model features a 83% recycled nylon outside jersey, a 100% recycled nylon inside jersey, and a 45% recycled fleece.
However, if you think that limestone is much better than oil, think twice. Limestone is a limited, nonrenewable mineral that must be extracted from the earth. Creating neoprene from it is an energy-intensive process and is thus not so superior in terms of environmental impact than petroleum.
If you are looking for a wetsuit with a reduced environmental impact, we have what you need: The ALT. This new model is made from Yulex Pure® natural rubber which claims to reduce the overall carbon footprint of a wetsuit by 80%.
Our Yulex Pure® wetsuits are around 30% more expensive than our highest priced wetsuits.
We do understand that not everybody can afford it. We are here to help passionate people make the most of their time in the water, and not to only target a higher social class.
While we and other brands will launch more and more natural rubber wetsuit models, the price of raw material should become more and more affordable. Then, bit by bit, we will be able to switch all our neoprene goods to Yulex Pure®, without our customers breaking the bank.
Carbon black is mostly used as a colorant and reinforcing ingredient in the rubber tires industry. It also happens to be a key ingredient in the manufacturing of neoprene.
At SHEICO, carbon black is sourced from pyrolyzed used tires, which reduces energy consumption and saves around 200 g of CO² emissions per wetsuit.
The glue that binds the jersey fabrics to the internal neoprene foam is now water-based instead of solvent-based.
Dyeing the fabric consumes a lot of water, so the threads that make up our fabrics are dyed before being woven. This considerably reduces water usage while reducing energy consumption and water pollution.
*Only on our black models.
The energy that our suppliers use is a crucial part of a brand’s carbon emissions. Having an eco-design is useless if your product is made using non-renewable energy.
We must protect our wetsuits from any contact with humidity or the sun so that they preserve their qualities when they arrive in the shop. Shipping wetsuits without a proper protection could cause irreparable damages to the neoprene.
Everyone knows their weight and height, so we only use this data, as well as some friendly advice:
1. Weight is the priority: Find your weight in the grid, then your height. Choosing your wetsuit is first a matter of volume, so weight comes before height.
2. It is necessary to feel tight when trying on our wetsuits. We offer an innovative 3D cut; it should be very tight. Neoprene loosens after a few hours in the water; if you take a size that is too loose, the wetsuit will not fit properly after a few sessions.
3. We give size ranges because each body type is unique. When you are in the low range of the interval (ex: 70kg for a size M man), you will have a rather loose wetsuit. When you are in the high range (ex: 78kg for a size M man), you will have a rather tight fit.
4. Inter-sizes "tall": We recommend a size "T" for a tall and thin morphology, from 10kg below your height on (ex: 70kg for 180cm = St).
5. Inter-sizes "short": We advise the size "S" for a short and wide morphology, from 10kg above your height on (ex: 75kg for 165cm= Ms).
ECLIPSE & EXO 2.0
ECLIPSE & EXO 2.0
Inner sole length (cm)
Inner sole lenght (cm)
|1. Glovelength (cm)||16||17,5||19||20,5|
|2. Palmwidth (cm)||9,5||10||10,5||11|
|1. Glovelength (cm)||16||17,5||19||20,5|
To take accurate measurements, you will need a proper measuring tape. You should always stand straight, without moving your waist/chest. Each circumference measurement must be taken horizontally, and the tape should be stretched but not tighten.
Height is measured from the top of your head to your soles.
Neck measurement is taken horizontally and under Adam’s apple. Keep your head straight and look in front of you.
Chest measurement is taken at the widest point of your chest, under your armpits at the same level as the shoulder blades.
The torso measurement is taken with the measuring tape placed around your bust, just under the pectorals.
Waist measurement is taken around your belly, by passing the measuring tape at the level of the navel.
Hip measurement is taken around the bottom on the widest point of your hips.