Join our adventure
Be the very first to hear about our new products & innovations, along with our athletes adventures & projects.Sign up
The EXO harness has been developed to optimize load distribution and thus prevent the rider from having misplaced pressure points. This is why we worked with a human kinetic science lab to help us on this project.
Their scientific approach and knowledge of human morphology enabled us to create a harness providing a level of comfort that was previously nonexistent.
The Exo harness has been developed to optimize load distribution
The EDF is a hexagonal structure with varying degrees of thickness. It is directly connected to the spreader bar through the straps and buckles.
Thanks to its shape and structure, the pressure is spread over a much wider area of the back and responds better, continuously, and more smoothly.
By being less concentrated on a small area of the back, the EDF protects the user and avoids any unwanted muscular effort to offset the bad traction.
The EDF is directly connected to the spreader bar through the straps and buckles so it receives 100% of the kite traction
This material has been developed to be integrated into body armors designed by the Royal Air Force for its pilots.
This material is made out of thick nylon threads assembled in a very tight way, it offers outstanding abrasion resistance and extreme durability. This innovation extends the lifetime of the MANERA harnesses.
Comfort is paramount in any harness; the UNION uses a single injection mould to make a one-piece foam backing. This makes it exceedingly durable, as there are less parts to be glued or stitched together. It absorbs far less water and is much lighter than the multiple foam layups used in some harnesses.
The new EXO uses a single thermoform mould to make a one-piece foam backing.
Because there’s nothing worse than a harness that rides up during your sessions, we developed the DOWN HOLD SYSTEM, an asymmetrical attachment that distributes the forces downward.
Secured in its original position, the hook does not ride back up.
The TUCK FLAPS further assist the DOWN HOLD SYSTEM using the flaps positioned on the ends of the spreader bar and inserted into the harness. Once the straps are tightened, they are compressed and locked.
By stiffening the connection between the harness and the buckle, they prevent it from riding up.
Two leash releases are integrated into the EXO harness, allowing you to trigger your leash easily whether you are right or left handed. The leash can also be loose and slidable, or clamped between the two rings.
We wanted to avoid unpleasant lateral contraction of the harness on the chest, which is why we adapt our spreader bar to harness sizes.
A well suited spreader bar will pull along both sides of the harness, while a spreader bar that is too small will pull with an acute angle, putting pressure on the rider and causing troublesome pain.
MANERA uses the ZATFITS technology to save your measurements and calculates your best fit for each product of our range.
To take accurate measurements, you will need a proper measuring tape. You should always stand straight, without moving your waist/chest. Each circumference measurement must be taken horizontally, and the tape should be stretched but not tighten.
Height is measured from the top of your head to your soles.
Neck measurement is taken horizontally and under Adam’s apple. Keep your head straight and look in front of you.
Chest measurement is taken at the widest point of your chest, under your armpits at the same level as the shoulder blades.
The torso measurement is taken with the measuring tape placed around your bust, just under the pectorals.
Waist measurement is taken around your belly, by passing the measuring tape at the level of the navel.
Hip measurement is taken around the bottom on the widest point of your hips.