Exo2.0 Harness collection
ref. 22212-0200
Colors
Graphite
-Pewter
-
Graphite
-
-Pewter
- Stiffness 0%
- Lightness 0%
- Durability 0%
Infos & Characteristics
It is difficult to improve a harness like the EXO, but the development of the ECLIPSE has taught us a lot and we have used this experience to redesign our star harness. We applied Adaptive Shell Technology to the EXO model to provide better support, reduced weight and increased durability.
Thanks to a stiffer center area, the EXO 2.0 perfectly supports the back. However, it allows greater freedom of movement thanks to its different levels of rigidity, especially its flexible outline.
The soft part of the EXO 2.0 is built in one “Single foam”. The single foam doesn’t absorb any water, so the harness stays light and comfy once in use.
Product Gallery
Key features
1Adaptive shell
The Adaptive Shell stiffness shades from hard in the center area to softer on the edges. The stiff center-belt prevents the harness from folding and compressing your body while preserving a good lumbar support.
2Single foam
The EXO 2.0 uses a single thermoform mould to make a one-piece foam backing. It absorbs far less water and is much lighter than the multiple foam layups used in some harnesses.
3Tuck flap
By stiffening the connection between the harness and the buckle, they prevent it from riding up.
Product details
Click
& slide
Thanks to a stiffer center area,
the EXO 2.0 perfectly supports the back.
ProductTechnologies
Adaptive shell
The Adaptive Shell stiffness shades from hard in the center area to softer on the edges. The stiff center-belt prevents the harness from folding and compressing your body while preserving a good lumbar support. The softer outline preserves intuitive mobility and adaptability.
It results in a shell that is forgiving where you need flex and stiff where you want support.
The Adaptive Shell stiffness shades from hard in the center area to softer on the edges
Single foam
Comfort is paramount in any harness; the UNION uses a single injection mould to make a one-piece foam backing. This makes it exceedingly durable, as there are less parts to be glued or stitched together. It absorbs far less water and is much lighter than the multiple foam layups used in some harnesses.
Down hold system
Because there’s nothing worse than a harness that rides up during your sessions, we developed the DOWN
HOLD SYSTEM, an asymmetrical attachment that distributes the forces downward.
Secured in its original position, the hook does not ride back up.
Tuck flap
The TUCK FLAPS further assist the DOWN HOLD SYSTEM using the flaps positioned on the ends of the spreader bar and inserted into the harness. Once the straps are tightened, they are compressed and locked.
By stiffening the connection between the harness and the buckle, they prevent it from riding up.
Spreader bar system
We wanted to avoid unpleasant lateral contraction of the harness on the chest, which is why we adapt our spreader bar to harness sizes.
A well suited spreader bar will pull along both sides of the harness, while a spreader bar that is too small will pull with an acute angle, putting pressure on the rider and causing troublesome pain.
HOW TO CHOOSE
ITS OUTLINE_
The EXO is a little higher/wider, for a snugger fit.
The ECLIPSE is lower/narrower, for greater freedom of movement.
ITS CONSTRUCTION_
The EXO uses Single Foam, a lighter and waterproof technology.
The ECLIPSE uses Gel Foam, a more comfortable technology.
ITS WAISTBELT_
The EXO uses an elastic waistbelt, which is more adaptable and flexible.
The ECLIPSE uses a neoprene waistbelt, which provides a close contact with the harness.
